Maritime utstyr og fartøy
Forsvarsmateriell needs the design, construction, and delivery of two identical training vessels, with an option for two additional vessels (1+1), to the Norwegian Armed Forces. The vessels, which will be less than 24 meters long, capable of a minimum speed of 18 knots, and have a total installed engine power of less than 750 kW, are intended for education and training in military practical navigation for the Royal Norwegian Navy. They must be modern, reliable, energy-efficient, pedagogically suitable, and built to civil (DNV) class standards, with a high degree of standardized civil components. The vessels are to be delivered fully equipped, including navigation systems, sensors, and a support and documentation package, and will be used in Vestland.
Slipp å lese og skrive alt selv, la Cobrief gjøre det for deg!
Prøv Cobrief ProThe purpose of this procurement is to meet the Norwegian Armed Forces’ need for increased training capacity for navigators in the Royal Norwegian Navy. This procurement covers the design, construction and delivery of two identical training vessels, with an option for two additional vessels (1 + 1) , to the Norwegian Armed Forces. The vessels shall be used for education and training in military practical navigation, in order to ensure that the required competence of future navigators in the Royal Norwegian Navy is maintained and further developed. The training concept is based on a recurring cycle of theoretical instruction, simulator training and practical navigation. The main teaching platform is the navigation system, which must be as close to identical as possible in the simulator and on board the vessels. In this context, the training vessels serve as a platform for bringing the navigation system to sea. The vessels shall be modern, reliable and representative of current standards, with primary emphasis on safe navigation, energy-efficient operation and pedagogical suitability. The vessels shall be built in accordance with civil (DNV) class. They shall be serially built, with a high degree of standardised civil components and subsystems, in order to ensure effective competition and keep operating costs at a low level. Each vessel shall have a length of less than 24 metres, be capable of achieving a minimum speed of 18 knots, and have a total installed engine power of less than 750 kW. The vessels shall be delivered fully equipped, including navigation systems and sensors, as well as the necessary support and documentation package for operation and maintenance.Hovedtrekkene i prosedyrenThe procurement is carried out in accordance with the Act of 17 June 2016 No. 73 on public procurement (anskaffelsesloven), and the Regulations of 12 August 2016 No. 974 on public procurement (forskrift om offentlige anskaffelser, FOA), part I and III.
Nærøysund Kommune trenger prosjektering, levering og installasjon av flytebrygger på ca. 175 meter i Rørvik, Trøndelag. Leveransen skal være et komplett anlegg med alt nødvendig utstyr, ferdig utlagt, og skal omfatte tre ulike steder i fiskerihavna i Rørvik sentrum. Den lengste delen skal erstatte gamle trekaier langs vestre molo, mens de to andre anleggene skal plasseres innenfor østre molo. Ferdigstillelsesfristen er 30. oktober 2026.
Nordland Fylkeskommune trenger tjenester for drift av "Båtrute Træna Lokal" fra 20. februar 2027 til 31. mars 2037, med en maksimal totalverdi på 160 millioner kroner. Oppdragsgiver stiller med hovedfartøyet som skal leies av operatøren i kontraktsperioden. Tjenestene skal leveres i Nordland.
Troms Fylkeskommune trenger entreprenørtjenester for forsterkning av tilleggskai, nye pullerter, mudring i fergebåsen og etablering av nytt løftesystem ved Brensholmen, Botnhamn og Hansnes fergekai. Arbeidet omfatter forsterkning av fundamentering og forankring av eksisterende tilleggskai, nye bunnforankrede fenderpanel og mudring i fergebåsen ved Brensholmen og Botnhamn, samt etablering av et nytt løftesystem med to tårn, mudring og oppgradering til bunnforankrede fenderpanel ved Hansnes fergekai. Det kreves erfaring fra tilsvarende arbeider.
Forsvarsmateriell needs services for a framework agreement over 7 years for the maintenance of four LM2500 gas turbines, manufactured by Navantia S.A. under license from General Electric, for the Norwegian F310-Fridtjof Nansen Class Frigates. The supplier must also be capable of providing original spare parts for the LM2500 gas turbine for delivery to the customer’s own inventory. The services include technical support, field services and materials, component repairs, on-the-job training, test cell capability, and depot level maintenance (level 4). The contractor must hold a license from General Electric to perform these services.
Forsvarsmateriell trenger en SaaS-løsning for risikoreduserende verktøy for UAS-operasjoner, med en maksimal totalverdi på 3,6 millioner kroner over 4 år. Løsningen skal støtte trygge, samsvarende og effektive UAS-operasjoner gjennom strukturert risikostyring, operasjonell kontroll og flåtestyring, og skal leveres i Vestland.